These are basic functions that help with some tasks for Ethical Hacking and Penetration Testing. Much of the functions are really basic (like get our public IP address), but are really useful in some cases.
Installation
To install Habu, simply:
$ pip install habu
Dependencies
Habu requires:
Click
Python (3.x),
Scapy-Python3
Matplotlib (Optional, only needed if you want to make some graphs)
Get Help
All the commands implement the option ‘–help’, that shows the help, arguments, options, and default values.
Verbose Mode
Almost all commands implement the verbose mode with the ‘-v’ option. This can give you some extra info about what habu is doing.
habu.arpoison: ARP Poisoning
This command sends ARP ‘is-at’ packets to each victim, poisoning their ARP tables for send the traffic to your system.
$ sudo habu.arpoison 192.168.1.5 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5
...
Note: If you want a full working Man In The Middle attack, you need to enable the packet forwarding on your operating system to act like a router. You can do that using:
echo 1 > /proc/sys/net/ipv4/ip_forward
habu.arpsniff: Discover devices on your LAN capturing ARP packets
This command listen for ARP packets and shows information each device.
Columns: Seconds from last packet | IP | MAC | Vendor
